Skip to content
Skip to content

Tips and advice

The techniques that make a test usable, on a vending machine as on a water dispenser.

The 5 mistakes that skew a test

A result is only as good as the sample. These five mistakes are enough to make it unusable.

  1. Touching the agarYour fingers must never come into contact with the agar surface.
  2. Leaving the tube openClose the tube straight after sampling.
  3. Mixing up samplesLabel each test: one slide, one label, one point.
  4. Cutting incubation shortRespect the time and temperature: 30 °C ± 1 °C, coliforms at 24 hours, yeasts and moulds at 48 hours, total flora at 72 hours.
  5. Reusing a slideEach slide is used only once.

All tips

Where to sample on a vending machine

Ten points, from the buttons to the dispensing nozzles.

Read

Where to sample on a water dispenser

The spout first, then the damp areas.

Read

Test before cleaning

A test right after cleaning checks the cleaning, and says nothing about the usual state of the machine.

Reading a slide with the matrix

From the level observed to the action to take.

Read

Always test the same areas

The only way to compare a slide with the previous one.

Reading each side at the right time

Coliforms at 24 hours, yeasts and moulds at 48 hours, total flora at 72 hours.

Choosing between the two slides

Coliforms for what hands and drinks touch, yeasts and moulds for damp areas.

Disinfecting a slide before throwing it away

Keep the tube closed until it is in the disinfectant bath, then follow the instructions: it is unscrewed under the liquid.

Keeping your record sheets

The written record that shows your approach to your customers.